 |
 |
 |
|
These cameras can be viewed and controlled from a standard Web browser, video display, or even a compatible cell phone or PDA.
Place them in your home, office, vacation home or almost anywhere else
that you'd like to keep an eye on things, with no PC required on
location! They are easy to install and operate and require no
additional software for the PC that you're viewing them on. Each camera
also comes with a free Web address, which can track the camera
automatically. All you need is a regular Web browser to view them on
your PC, as all of the other required software, including control
software (TCP/UDP) and e-mail software (SMTP), is already inside the
camera.
This
camera can communicate wirelessly with standard 802.11b/g wireless
devices, allowing the flexibility to install and operate the camera
without running network wires, and utilizing SSID filtering and
powerful 64/128/152 bit WEP encryption helps to protect your wireless
network from illegal intrusion. Since the camera is attached through an
Ethernet connection (or router) and power source, you don't need a
computer at each location you want monitored. Each camera has a
built-in web server with IP address. To view the images on a PC, simply
open a graphics-capable Web browser and type in the cameras specified,
password optional Internet address.
This
model was designed for outdoor operation, and meet both IPX4 and UL6500
standards of outdoor equipment. They operate down to -4F and up to
122F, and are splash resistant for wet-weather operation.
Use of the built-in microphone and a separately purchased amp-equipped speaker enables two-way voice communication
(transceiver system) between the network camera and a PC used to
monitor the camera image. In addition to conventional monitoring of
images and sound, voice messages can be transmitted from the PC to the
network camera. Voice transmission and reception can be switched easily
from the PC used to monitor the image.
This
camera features a CCD (Charged Couple Device) for sharp, enhanced image
expression. The image refreshing speed (maximum) has been increased to
30 images per second for smoother displays of moving images.
The
BB-HCM371A features an SD Memory Card slot for recording images
captured by the network camera directly onto an SD Memory Card (sold
separately).
* Voices cannot be recorded.
Our
cameras are attached through an Ethernet connection (or router) and
power source, you don't need a computer at each location you want
monitored. Each camera has a built-in Web server with IP address. To
view the camera's images on a PC, simply open a graphics-capable Web
browser and type in the cameras specified Internet address(password
optional).
Using
a standard Web browser, video display, or even a compatible cell phone
or PDA, you can control the movement of the camera. There is 120º of
Pan (left & right) movement and 65º of Tilt (up & down)
movement available. You can also assign a "Home Position" that allows
you to return the camera to a pre-designated shooting position. Up to
eight shooting positions can be registered in advance, so you can aim
the camera exactly where you want it. You can also click on the part of
the image you want to see, and automatically bring that part to the
center of the screen.
The
camera can be set to automatically record video at certain times and
certain speeds. In addition, with optional, external sensors attached
to the camera, it is possible for the camera to email
or record when triggered by motion, sound, light, timer, or even a push
button. These convenient functions eliminate your need to constantly
check the image.
The
FREE viewnetcam.com service allows you to create a personal Web address
(e.g., http://bob.viewnetcam.com) at which your camera's live image can
be found on the Internet. Access your Panasonic Network Camera live
from virtually any Internet connection point around the world! Your Web
browser is the only software you'll need. Here's how the camera and
service works: special software embedded within your Panasonic Network
Camera gives your camera the ability to locate your unique Internet
address. No matter what kind of Internet connection you have or which
Internet provider you use, the viewnetcam.com service will keep your
camera's Internet address permanent.
With
the built-in heat sensor, the camera can be set to record and/or notify
you by email when someone enters the room. It can even automatically
move to a preset location when triggered, just in case someone was
viewing a different part of the room. |
|
|
|
|
|
 |
|
 |
|
Features
| Color Video |
Yes |
| Image Compression |
JPEG |
| Video Streaming Format |
Motion JPEG |
| Quality Video Resolution |
640 x 480, 320 x 240(default), 160 x 120 1 |
| Frame Rate |
Max. 12 frames/sec (640x 480)
Max 30 frames/sec (320 x 240)
Max 30 frames/sec (160 x 120) |
| Authentication |
ID/Password authentication (Administrator / General Users (up to 50)) |
| Encryption |
IPsec |
| IPv4/v6 |
IPv4/v6 Dual Stack |
| Supported Network Protocols |
IPv4: HTTP, FTP, SMTP, TCP, UDP, IP, DHCP, DNS, ARP, ICMP, and POP3 before SMTP |
| Upgrades |
Via Ethernet connection 2 |
| Automatic Network Configuration |
Yes, with UPnP supported router |
| Simultaneous Viewers |
30 |
| Image Buffer |
About 125 frames (320 x 240) with time display. Expandable using optional SD Card. |
| Pre-Alarm Image Buffer |
Yes |
| Image Transfer via E-Mail (SMTP) or FTP |
Triggered by external sensor, alarm, motion detection and/or timer |
| Camera Recording |
Yes, records data to a web site through FTP or to the hard drive of a local computer. |
| Max. Bandwidth Control |
0.1/0.2/0.3/0.5/1.0/2.0/3.0/5.0Mbps/ unlimited |
| Free DDNS Compatible (Viewnetcam.com) 3 |
Yes |
| Cellular Phone Compatibility |
View Snapshot and Control from Compatible Cell Phone |
| Multiple Camera Views |
Yes, cameras can be viewed in three groups of 4 cameras, or 12 cameras on one screen. |
| Multi-Language Interface |
English, German, Spanish, Italian, French and Japanese |
| Built-in Calendar Timer |
Yes |
| Auto Time Adjustment with NTP |
Yes |
| Time & Day Access Control |
Yes |
| Remote External Output Control |
Yes |
| LED Indicator Control |
On/Off or On During Access |
| CAMERA FEATURES: |
. |
| Zoom |
up to 10x digital zoom
(Free firmware upgrade may be required) |
| Image Sensor |
1/4" 320,000 pixel CCD |
| External Video Input |
No |
| Viewing Angle |
53° horizontal
40° vertical |
| Remote Pan Angle |
60° left and right max. (or less based upon user setting) |
| Remote Tilt Angle |
-45° to +20° (or less based upon user setting) |
| Maximum Pan/Tilt Speed |
Pan: 100°/sec
Tilt: 100°/sec |
| Preset Locations |
23 preset parameters include Pan, Tilt and White balance (including Home position and 2 alarm positions).
(Free firmware upgrade may be required) |
| Click to Center |
Yes |
| Focus |
Fixed 1m-infinity |
| Aperture |
(f No.) : F1.8 |
| Illumination |
Normal: 3 - 100,000 lx
Color Night View: 0.2 - 100,000 lx |
| White Balance |
Auto/Manual/Hold |
| Adjustments |
Brightness, White Balance |
| Exposure |
Auto |
| Clear Dome Lens Cover |
Yes |
| Video Pass-through |
No |
| AUDIO FEATURES: |
. |
| 2-Way Audio |
Yes (Half Duplex) |
| CODEC |
PCM (64kbps), ADPCM (32kbps), Monaural |
| Frequency Range |
300Hz - 3.4kHz |
| Input |
External Microphone (not included) or audio source using RCA jack. |
| Output |
External Speaker (not included) using stereo mini jack. (output is mono) |
| Audio Pass-through |
No |
| WIRELESS FEATURES: |
. |
| Wireless Technology |
IEEE802.11b/g |
| Frequency |
2.4000 - 2.4835 GHz |
| Number of Channels |
11 channels |
| Transmission Speed |
up to 54Mbps |
| Security |
WEP(40/128bit), SSID |
| INTERFACE FEATURES: |
. |
| Network Connection |
Ethernet (10Base-T/100Base-TX) |
| External I/O Connector |
2 input / 1 output |
| SD Card Slot for Image Buffer |
Yes |
| Analog Video Output |
No |
| Speaker/Microphone Jack |
3.5mm mini-jack |
| OTHER FEATURES: |
. |
| Weatherproof (splash resistant) |
Yes, IPx4 |
| Built-in Sensor |
Motion Detection (Free firmware upgrade may be required) |
| Power Over Ethernet Compatibility |
PowerDsine (www.powerdsine.com) Power over Ethernet Midspan 3000/6000 Series
when used with Splitter PD-401/12-PAN |
| Multiple Mounting Options |
Wall mount, desk/ceiling mount, tripod mount |
| Operating Temperature |
-20°C to +50°C (-4°F to +122°F) |
| Operating Humidity |
20-90% RHG, non-condensing |
| Power Source |
12VDC (120V AC Adaptor included) |
| Power Consumption |
10W |
| Included Accessories |
Flexible stand and screws, AC Adaptor, Sunshade, Connector Cover, Rubber Cap, Putties, Self-Bonding Tape and Setup CD-ROM |
| PC SYSTEM REQUIREMENTS: |
. |
| Operating System Requirements |
Windows 98SE, NT4.0, 2000, ME and XP (IPv6 : Windows XP only) |
| Web Browser requirements |
Internet Explorer 5.5 or later/Netscape Navigator 4.7 (The network camera image is not displayed correctly in Netscape 6.x) |
| Dimensions (H x W x D) |
315/16'' x 315/16'' x 31/8'' |
| Weight |
0.78 lbs |
Footnotes
1 160 x 120 for mobile access only
2 Some features listed here may require a free firmware upgrade to activate.
3 Viewnetcam.com is a free, optional service that requires registration.
|
|
|
 |
|
 |
|
Shopping Cart
My Account
Wish List
Help
Contact Us
